Open the Setup page and navigate to the Camera > IP Camera menu. Type the IP of your NVR on the URL bar of your web browser and log in using your username and password. In our case, we will add the cameras through the web browser. Adding your cameras can be done from the Uniview recorder directly and or from the recorder’s web service. Once this is done for all of your cameras, you can then move on to adding your cameras to the recorder. After finding all of your cameras on the network you will need to change their IP address to match your network’s default gateway.įor example, the NVR’s IP is 192.168.1.XXX, the camera’s IP should be in the same format. In this tutorial, we will be adding a Dahua IP camera to the recorder so we used the Dahua “Config tool” to find their cameras. Most camera manufacturers will make their own tool for finding cameras of theirs on the network. However, sometimes you need to install the scanning tool provided by the manufacturer of your third-party cameras. It also provides an option to load up any camera in a web browser. The software will scan your local network and list all the cameras located on your network. How to add an ONVIF camera to Uniview recorder This tool can scan your network and find Uniview devices and third-party devices as well. Uniview offers software named EZTools which can be downloaded from Uniview’s website or from our download section. This tutorial will show step-by-step how to add such a camera to a Uniview CCTV system. This method is useful and very convenient if you like the Uniview NVR but you still need to use other non-Uniview IP cameras. A third-party camera is any other branded camera, basically any non-Uniview IP camera. Here we will show how to add a third-party IP camera to a Uniview NVR.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |